+30 23940 25290 info@roka-refractory.com

Red Firebrick

Red Firebricks
  • Pistollettes 22x10x5.5

    Pistollettes 22x10x5.5

  • Briquettes 5.5x22x3-6

    Briquettes 5.5x22x3-6


Code: Red Firebricks
Category: Firebricks


 

“Red is the ultimate cure for sadness.”

Bill Blass
 
 
Red Firebricks
 
Red firebricks is the most popular kind of firebricks for the region of France and Southern Africa. 
 
For that case of firebricks pay attention to purchase real firebricks rather than substitute ceramic bricks. 
 
The production of refractory bricks has always been our company’s core activity.
 
With a production capacity of 100.000 tones per annum, Roka Refractories is one of Europe’s largest players. 
 
This category of bricks belong to the category of “fireclay refractory bricks”.
 
With more than 2.000 clients worldwide and by exporting in more than 45 countries, we are the only company of its kind that focuses on special refractories for appliances that call for elevated aesthetics such as barbecues, fireplaces, stoves, pizza ovens. 
 
Barbecue and pizza oven producers prefer to work with us for the following reasons:
 
 
👉 Color stability:
 
Most refractories manufacturers address their products to industrial users. Hence, little or no attention is paid to the uniformity of the products. 
 
Often, there are noticeable color variations within a lot, a batch, or even a single palette.
 
Given that barbecues and fireplaces are considered vital equipment for internal and external decoration in a house owner’s eyes, the constancy of the color of the construction is, without doubt, very important. 
 
Roka Refractories considers the appearance of its firebricks fundamental, seeking to satisfy even the most demanding decorators.
 
 
👉 Finest Finishing’s :
 
Appearance is not just a matter of color. 
 
The edges of the bricks are equally significant, as a mismatch could end up “destroying” the lineage of a construction. 
 
Similarly, finishing’s form part of what a client perceives as quality. 
 
Roka Refractories accomplishes sharp, linear edges for its bricks by investing in the quality of the metal of the molds used to form the bricks. 
 
In addition, the company holds a long-term relationship with a specific manufacturer of molds to secure a high level in the supplied services.
 
 
👉 Mentionable frost resistance:
 
Given that firebricks are used in exterior furniture such as barbecues and pizza ovens, they are exposed to low temperatures for several months. 
 
Firebrick barbeques are also known as “Mediterranean” barbeques since firebricks crack in northern countries when they freeze. 
 
What causes the bricks to crack is the freezing of the water absorbed inside their body and the shrinkage-expansion that ice generates. 
 
Roka Refractories’ firebricks have very low water absorption rate, close to 7% per weight, being able to withstand extreme environmental conditions.
 
 
👉 Higher Strength Properties :
 
Shaped refractories are not famous for their mechanical performances. 
 
Generally, firebricks are of lower compressive and flexural strength than other types of ceramics. 
 
Yet, firebricks are subject to quite severe load, especially in fireplaces, where wood is combusted. In addition, builders prefer “stronger” bricks as they do not break easily during construction. 
 
ASTM sets a minimum of 3 MPa for the Modulus of Rupture of firebox bricks.
 
This value is indicative of the average strength of firebricks. 
 
Roka Refractories’ fireclay bricks carry a MOR index greater than 8 MPa, being among the strongest in the global market.
 
 
Certifications:
  • Aristotle University of Thessaloniki for Refractoriness
  • CE.RE.CO for Refractoriness
  • Istituto di Ricerche Agrindustia for Food Contact Suitability
  • Democritos Institute for Absence of Asbestos
  • T.U.V. Austria-Hellas for Quality Management System (ISO 9001:2008)
 
 
CHEMICAL COMPOSITION – FIREBRICKS  
DATA FIREBRICKS ROKA REFRACTORIES
INTERNATIONAL STANDARDS
 
SiO2 72,40% 40-75%  
AI2O3 17,50% 15-45%  
CaO 0,29% 0-0,7%  
Fe2O3 1,32% 0-6%  
K2O 3,43% 0-4%  
MgO 0,53% 0-0,7%  
Na2O 1,07% 0-2%  
TIO2 0,95% 0-2,8%  
 
 
 
MECHANICAL PROPERTIES – FIREBRICKS
     
Shapes and Dimenssions 165kgf/cm2=16,18MPa  
Bending strength 8,81MPa  
Cold crushing strength 62,82Mpa=640,76kgf/cm2  
Porosity 7,2% p.w.  
Specific weight 2,12gr/cm3  
P.C.E. >1100oC  
Thermal expansion <1%